| Pro Plow anchors |
|
|
Our Pro Plow™ anchors are exceptionally effective in a variety of sea beds. Work very well with Anchorlift bow rollers,
which give you a self launching system.
Release the anchor without the need to leave the controls. Remains stable in various tidal conditions.
Available in hot dipped galvanized and
in high polished stainless steel AISI 316L.
Sizes from 6 kg / 13 lbs to 50 kgs / 110 lbs.
According to our testing, the Pro Plow™ anchors holds
up to 35% more weight than our competitor's counterpart, the Bruce anchor.
|
|
 |
|
| Stainless Steel Models |
Weight |
Boat Size |
| RSA6 |
6 kgs / 13,2 lbs |
up to 25 feet |
| RSA8 |
8 kgs / 17,6 lbs |
up to 30 feet |
| RSA10 |
10 kgs / 22 lbs |
up to 40 feet |
| RSA15 |
15 kgs / 33 lbs |
up to 45 feet |
| RSA20 |
20 kgs / 44 lbs |
up to 55 feet |
| RSA30 |
30 kgs / 66 lbs |
up to 75 feet |
| RSA50 |
50 kgs / 110 lbs |
up to 90 feet |
|
|
|
|
|
| |
 |
|
| Galvanized Models |
Weight |
Boat Size |
| SA6 |
6 kgs / 13,2 lbs |
up to 22 feet |
|
SA8
|
8 kgs / 17,6 lbs |
up to 28 feet |
| SA10 |
10 kgs / 22 lbs |
up to 35 feet |
| SA15 |
15 kgs / 33 lbs |
up to 40 feet |
| SA20 |
20 kgs / 44 lbs |
up to 50 feet |
| SA30 |
30 kgs / 66 lbs |
up to 60 feet |
|
SA50
|
50 kgs / 110 lbs |
up to 75 feet |
|
|
|
|
|
| Test Shark Anchor vs Bruce type anchor |
|
 
|
|
XR anchors Higher holding power, Less weight NEW 2012
|
|
Anchorlift new XR anchor is specifically designed to get the anchor parked so close to the bow as possible.
The special design of anchor wing allows the anchor not beating in the bow when parked in roller.
Anchor arm also has its function in that the anchor goes out and clear of the bow before it goes down.
Low weight has also been important without it having gone out of the anchor's holding power,
as this is intended to be used on sport fishing boats and other boats which will have as little
weight in the bow as possible. Anchorlift XR anchor is made of the same physical sizes as the famous Bruce
anchor, but the weight is only about 60% compared with the Bruce anchor.
Anchorlift XR anchor is made of Aisi 316L high polish stainless steel.
|
|
| Stainless steel |
Weight |
Boat Size |
| XR6 Size 6 |
3,6 kgs / 7,9 lbs
|
up to 22 feet |
|
XR8 Size 8
|
4,8 kgs / 10,5 lbs |
up to 28 feet |
| XR10 Size 10 |
6 kgs / 13,2 lbs |
up to 35 feet |
| XR15 Size 15 |
9 kgs / 19,8 lbs |
up to 40 feet |
| XR20 Size 20 |
12 kgs / 26,4 lbs |
up to 50 feet |
| XR30 Size 30 |
18 kgs / 39,6 lbs |
up to 60 feet |
|
XR50 Size 50
|
30 kgs / 66 lbs |
up to 75 feet |
|
XR80 Size 80
|
48 kgs / 105 lbs |
up to 90 feet |
|
XR8 Jeanneau Cap Camarat 8,5
 |
XR Anchor test / product sheet.
|
| Pro Claw anchors |
|
Our Pro Claw™ anchor is based on the famous Bruce anchor, which was originally made for oil riggs in the North Sea.
Sets fast and secure to almost any bottom conditions.
Made in one piece. Available in hot dipped galvanized steel and stainless steel AISI 316L. |
|
 |
|
| Stainless Steel Models |
Weight |
Boat Size |
| RMA5 |
5 kgs / 11 lbs |
up to 22 feet |
RMA75 |
7.5 kgs / 16.5 lbs |
up to 28 feet |
| RMA10 |
10 kgs / 22 lbs |
up to 35 feet |
| RMA15 |
15 kgs / 33 lbs |
up to 40 feet |
| RMA20 |
20 kgs / 44 lbs |
up to 50 feet |
| RMA30 |
30 kgs / 66 lbs |
up to 60 feet |
|
RMA50
Spesial order only
|
50 kgs / 110 lbs |
up to 75 feet |
|
|
|
|
|
| |
 |
|
| Galvanized Models |
Weight |
Boat Size |
| MA5 |
5 kgs / 11 lbs |
up to 22 feet |
MA75 |
7.5 kgs / 16.5 lbs |
up to 28 feet |
| MA10 |
10 kgs / 22 lbs |
up to 35 feet |
| MA15 |
15 kgs / 33 lbs |
up to 40 feet |
| MA20 |
20 kgs / 44 lbs |
up to 50 feet |
| MA30 |
30 kgs / 66 lbs |
up to 60 feet |
| MA50 |
50 kgs / 110 lbs |
up to 75 feet |
|
|
|
|
|
| |
|
Anchor Connectors (with swivel)
|
|
Stainless steel AISI 316L anchor connectors with swivel.
With an anchor connector swivel attached to the anchor it is impossible for the chain to get twisted.
The oval shaped joint allows perfect sliding of the anchor through the roller with no risk of damaging any components.
Fits the Shark, Delta, Bruce, Pool and Holding anchors up to 200 kgs/ 440 lbs. |
|
 |
|
| Model Number |
Breaking Load |
Chain size |
| 964408 |
2500 kgs / 5500 lbs |
6-7 mm - 1/4" Anchors 5kg/11lbs to 10kg/22lbs |
| 964410 |
5000 kgs / 12500 lbs |
8-10 mm - 5/16" - 3/8" Anchors 10kg/22lbs to 25kg/55lbs |
| 964412 |
7000 kgs / 15400 lbs |
10-13 mm - 3/8" - 1/2" Anchors 25kg/55lbs to 120kg/265lbs |
| 964420 |
18500 kgs / 40700 lbs |
14 - 20mm - 1/2" - 3/4" Anchors 80kg/176lbs and up. |
|
|
 |
|
|
|
Diagram 964408 Metric
Diagram 964408 US
|
Diagram 964410 Metric
Diagram 964410 US |
Diagram 964412 Metric
Diagram 964412 US |
Diagram 964420 Metric
Diagram 964420 US |
|
|
